• Mouth size :φ50mm
• Current range :AC 0.00mA~1000A
• Voltage range :AC 0.00V to 600V
• Phase range :0.0W~600kW
• Active power range :0.0W~600kW
• Reactive power range :0.0W~600kVAR
• Apparent power range :0.0W~600kVA
• Power factor range :-1~ 1
• With USB interface, can be connected to the computer data upload
• Equipped with large capacity battery, with charging function
| Model number | UT268B | ||
| Power supply | DC3.7V Lithium rechargeable battery | ||
| Power consumption | The maximum power consumption of the backlight is 250mA, and the battery can work continuously for more than 5 hours | ||
| Disy mode | LCD color disy,71×52mm | ||
| Instrument size | Length and width: 187*191*51mm | ||
| Voltage range | AC 0.00V～600V | Resolution: AC 0.01V | Accuracy: ±0.5FS |
| Current range | AC 0.0mA～1000A | Resolution: AC 0.1mA | Accuracy: ±0.5FS |
| Phase range | 0.0°～360.0° | Resolution: 0.1° | Accuracy: ±1° |
| Frequency range | 45.00Hz～65.00Hz | Resolution: 0.01Hz | Accuracy: ±0.5Hz |
| Active power range | 0.0W～600kW | Resolution: 0.1W | Accuracy: ±(3percentrdg 3dgt) |
| Reactive power range | 0.0W～600kVAR | Resolution: 0.1VAR | Accuracy: ±(3percentrdg 3dgt) |
| Apparent power range | 0.0W～600kVA | Resolution: 0.1VA | Accuracy: ±(3percentrdg 3dgt) |
| Power factor range | -1～+1 | Resolution: 0.001 | Accuracy: ±0.03 |
| The current vector and | 0mA～3000A | Resolution: 1mA | |
| Phase sequence | Positive phase: U1,U2,U3 or I1,I2,I3 the cursor flashes from left to right
Inverting: U1,U2,U3 or I1,I2,I3 the cursor flashes from right to left in sequence |
||
| Detection rate | About 2 seconds/time | ||
| Data retention | Press the HOLD key to HOLD data during the test, and the "hold" symbol is disyed | ||
| Data storage | 500 groups | ||
| USB interface | USB interface,存数据上传电脑,便于分析管理数据 | ||
| Automatic shutdown | Meter shuts down after no operation for about 15 minutes | ||
| Backlight function | Yes, suitable for dark ce and night use | ||
| Voltage detection | When the battery voltage is lower than 3.0V, the battery low voltage symbol is disyed, reminding to charge in time | ||
| Voltage test line length | 1.5m | ||
| Current clamp wire length | 2m | ||
| Working temperature and humidity | -10℃ ~ 40℃; 80percentRh below | ||
| Storage temperature and humidity | -10℃ ~ 60℃; 70percentRh below | ||
| Input impedance | 测试电压Input impedance为：2MΩ | ||
| Withstand voltage | Withstand 1000V/50Hz sine wave AC voltage between the meter line and the housing for 1 minute | ||
| Insulation | Meter line and housing ≥100MΩ | ||
| Structure | 双重Insulation | ||
| Safety rules | IEC61010-1 CAT Ⅲ 600V,IEC61010-031,IEC61326, pollution level 2
|
||
