Technical specifications
Work Can |
Wireless high and low voltage speech nuclear phase, frequency, phase, phase sequence, electrical test |
Electricity source |
DC 3.7V rechargeable lithium battery,USB charging interface, continuous operation for about 10 hours |
Transmission mode |
315MHz,433MHz wireless transmission |
Nuclear phase distance |
The distance is about 150 meters |
Disy mode |
3.5 "true color LCD disy |
Measuring range |
Nuclear phase voltage level: AC 10V ~ 550kV |
Phase: 0.0° ~ 360.0° |
|
Frequency: 45Hz to 75Hz |
|
Resolution rate |
0.1°;0.1Hz |
Precision |
Phase: ≤±10° (23℃±5℃,80percentRH below) |
Frequency: ≤±2Hz (23℃±5℃,80percentRH below) |
|
Phase differentiation |
In phase :-30° ~ 30°; Out of phase: 90° ~ 150° and 210° ~ 270° |
语音Work能 |
同相、异相、X信号正常、Y信号正常等语音Work能 |
Insulation rod size |
After stretching, the length is about 3.2m. The length after contraction is about 0.6m |
Data storage |
Group 9999 |
Nuclear phase mode |
Contact nuclear phase: the bare conductor below 35kV, or the conductor with safety insulation skin below 110kV directly contact the nuclear phase (with insulated rod operation) |
Non-contact core phase: bare conductor above 35kV, or line above 110kV adopts non-contact core phase (with insulated rod operation) |
|
Electrical instruction |
Detector "toot toot toot" beep |
Shift gears |
Automatic shift |
Sampling rate |
2 times per second |
Instrument size |
Detector: Length width and thickness 145mm×60mm×48mm |
Receiver: Length and width 250mm×100mm×40mm |
|
Backlight control |
Press the up and down arrow keys to adjust the backlight brightness |
Induction intensity control |
According to the induced electric field intensity, the detector can automatically control the magnification, which is convenient for the nuclear phase in dense ces |
Data retention |
Press the HOLD key to HOLD data in test mode, then press the Hold key to cancel hold |
退出Work能 |
按ESC键退出当前Work能界面,返回上级目录 |
Data retrieval |
按ENTER进入Data retrieval模式后,按箭头键翻阅存数据 |
No signal indication |
The "----" symbol is disyed dynamically when the receiver does not receive the transmitted signal |
Automatic shutdown |
开机约15分钟后,仪表Automatic shutdown,以降低电池消耗 |
电池电压 |
When the battery voltage is lower than 3.2V:
|
Rated current |
Detector: 35mA max; Receiver: 300mA max |
Instrument quality |
Detector: 205g(including battery) |
Receiver: 395g(including battery) |
|
Insulation rod: 1.45kg |
|
Total mass: 9.8kg(including instrument box) |
|
Working temperature and humidity |
-10℃ ~ 40℃; 80percentRh below |
Storage temperature and humidity |
-10℃ ~ 60℃; 70percentRh below |
Interference |
No extra-strong electromagnetic field; No 433MHz,315MHz simultaneous interference |
Insulation strength |
Insulation rod: AC 110kV/rms(5 sections of insulation rod after stretching, between the ends) |
Detector: 2000V/rms(between the two ends of the housing) |
|
Receiver: 2000V/rms(between the ends of the housing) |
|
Structure |
Drip-proof type II,IP63 |
Suitable for safety rules |
GB13398-92, GB31.1-311.6-8,3DL408-91 standard and the national newly issued power industry standard "1kV ~ 35kV portable nuclear phaser general technical conditions DL/T971-2005" requirements |
Comply with IEC61481-A2:2004; IEC 61243-1 ed.2:2003 Standard |
