UT116C product Features
6000 count LCD disy
Automatic range
Relative value measurement
On - off test function
Diode measurement function
Voltage regulator tube,LED test
Battery voltage measurement function
Low voltage disy, automatic shutdown function
| UT116C | ||
| The range of | Resolution | Accuracy ±(apercent reading bpercent words) |
| 600Ω | 0.1Ω | ±(1.0percent) reading 10
|
| 6KΩ | 1Ω |
|
| 60KΩ | 10Ω |
|
| 600KΩ | 100Ω |
|
| 6MΩ | 1KΩ | ±(1.5percent) reading 10 |
| 60MΩ | 10KΩ | ±(2.5percent reading 10 --) |
|
|
|
|
|
|
|
|
| 9.999nF | 0.001nF | ±(3.0percent reading 20) |
| 99.99nF | 0.01nF | ±(2.5percent reading 10 --) |
| 999.9nF | 0.1nF |
|
| 9.999μF | 1nF |
|
| 99.99μF | 10nF |
|
| 999.9μF | 100nF | ± (3.5percent reading +25) |
| 9.999mF | 1μF | ± (5percent) reading +50 |
| 99.99mF | 10μF | For reference only |
| ≤50Ω sound,≥100Ω buzzing does not ring,50Ω to 100Ω can ring or not ring | ||
| Forward 4148:500mV ~ 800mV. Open circuit voltage is about 3.2V, measuring current is about 2mA | ||
| Load current about: > 10mA; ±(1.5percent) Reading 5 | ||
| None | ||
| Open circuit voltage: about 21V, such as disy voltage more than 21V will not damage the semiconductor or LED under test; Current: about 5mA | ||
| There is | ||
| There is | ||
| 约15min,待机电流<20uA,短按SELECT按键唤醒 | ||
| Approximately < 2.7V disys the "Low power" symbol | ||
| 1.5V(AAA) x 2 battery | ||
| Red + Gray | ||
| 2 spare test clamp arms, 2 1.5V(AAA) batteries,1 copy of instruction manual,1 pair of special test wire | ||
| 204mm×33mm×25mm | ||
| 80g | ||
| The color box | ||
| 60 | ||
| 440mm×420mm×210mm | ||
