Characteristic
True color TFT-LCD full Chinese disy.
Calibration function: full range range open and short circuit scavenging, three groups of user point frequency calibration
Multi-frequency test: Support 10 frequency scan test
Multilevel test: Support 10 level sweep tests
File management: 10 groups of internal storage and 10 groups of USB disk storage
增强型Comparator（分选）功能：可编程的P1~P9 九档分选,主参数HI,IN,LO显示和输出,NG,AUX,SREJ,IDX,EOM 等显示及输出.
Absolute deviation (ABS) comparison method, relative deviation (PER) and SEQ comparison method.
Switchable AUX sorting.
Custom sorting results ring.
Built-in RS232C interface and Handler interface.
Built-in RS485/USB port (applicable to Rev.E)
GPIB interface Optional (Applicable to Rev.E)
1000V super impact protection
Specifications
| Measurement parameters | Cs-Rs,Cs-D,Cp-Rp,Cp-D,Lp-Rp,Lp-Q,Ls-Rs,Ls-Q,R-X,Z-θrad,Z-θdeg |
| Basic accuracy | 0.05% |
| Test frequency | 50Hz ~ 200kHz (continuous frequency point) |
| Test range | Automatic, manual and nominal ranges,9 ranges |
| Test the speed | 40 times per second, 10 times per second, 3 times per second |
| Disy range | L: 0.00001μH-9999.99H
C: 0.00001pF – 9999.99μF R,X,Z: 0.00001Ω - 99.9999MΩ D, 0.00001 – 9.99999 Q: 0.00001 – 99999.9 Δ%: -999999% - 999999% θ(deg): -179.999° -179.999° θ(rad):-3.14159 – 3.14159 DCR: 0.00001Ω ~ 99.9999MΩ |
| Output impedance | 30,50, and 100 |
| Monitor parameters | Z, D, Q, θr, θd, R, X, G, B, Y, Vac, Iac, Δ, Δ% |
| The reading | All parameters are six digits: 999999 |
| Equivalent mode | Series and parallel equivalent |
| Signal level | 10.00mV~2.00V AC
100.0μA~20.00mA AC |
| The average number of times | 1~256 |
| Trigger mode | Internal, manual, external and remote |
| Trigger delay | 0.01ms~60s |
| Comparator | 14 file sorting,10 groups of qualified files,1 group of unqualified files,
1 group of sub-parameter unqualified file File counting function: 999999 MAX |
| List scan | 10 steps (frequency, voltage and current) |
| Comparison mode | Read only comparison, absolute deviation (Δ) and relative deviation (Δpercent) |
| Calibrate | Open circuit clearing, short circuit clearing (sweep frequency and dot frequency) |
| File | 内部存储10个File
外部USB存储10个File |
| Data recording | 9999 组File（.csv) |
| Ring function | Pass/pass/fail |
| Interface | RS232/RS485/USB/HANDLER/GPIB(可选)
(Rev.E and later features) |
| Communication protocol | SCPI/Modbus(RTU) |
| Other functions | Automatic LCZ |
| Power requirements | AC 85V-240V, 50Hz-60Hz
20W MAX |
| Size and weight | 264 (W)x107(H)x350 (D)
3kg, net weight |
