| Specifications | |
| CRT | |
| Type | 6-inch square disy with calibration line; Marking position 0percent, 10percent, 90percent, 100percent; 8 x 10 cells (1 cell = 1 cm) |
| Z-axis input | Input impedance: about 47 kω; Sensitivity: above 5 vp-p; Bandwidth: DC ~ 2MHz |
| Vertical system | |
| Sensitivity | 5mV ~ 5V/DIV+3%, x 5MAG+5% |
| Bandwidth | DC (AC 10Hz) ~ 20MHz (-3dB);DC (AC 10Hz) ~ 7MHz (-3dB) x 5MAG |
| Rise time | 17.5nS (50nS in x 5MAG) |
| Input impedance | About 1MΩ |
| Input coupling | AC, DC, GND |
| Vertical mode | CH1, CH2, DUAL (ALT/CHOP), ADD, CH2 INV |
| Horizontal system | |
| Scanning time | 0.2μS ~ 0.5S/DIV 3%;100nS ~ 50mS/DIV 5% (× 10MAG);20nS ~ 50nS/DIV |
| Trigger | |
| Trigger模式 | AUTO, NORM, TV-V, TV-H |
| Trigger源 | CH1, CH2, ALT, LINE, EXT |
| Trigger耦合 | AC |
| Trigger斜率 | " " "Or" -" |
| X-Y operation | |
| Sensitivity | 5mV ~ 5V/DIV+4% |
| X轴Bandwidth | DC ~ 500kHz |
| Phase difference | 3o or less from DC ~ 50kHz |
| Signal output | |
| TriggerSignal output | Voltage: about 20mV/DIV into 50Ω |
| Correction terminal output | 1kHz square wave, 2Vpp 2percent |
| Use the power supply | |
|
|
Ac 115V/230V 10percent, 50/60Hz |
| Attachment | |
|
|
Power cable x 1; Operation manual x 1; Measuring stick (10:1/1:1) x 2 |
| Size and weight | |
|
|
310(W) x 150(H) x 455(L) mm; About 8 kilograms |
