Product specifications: Fluke 1535/1537 2500V insulation resistance tester (digital high voltage megohm meter)
| General technical index |
| The disy screen |
73.5 mm x 104 mm |
| Battery |
8 节 IEC LR6 AA 碱性Battery |
| Overall dimensions (height x width x length) |
184 mm x 211 mm x 93 mm |
| The weight of |
1.3 kg |
| Temperature |
|
| 工作Temperature |
-10°c - 50°c |
| 存放Temperature |
-20°c - 60°c |
| Operating humidity |
No condensation (< 10 °C) |
|
≤80 percent relative humidity (10 °C to 30 °C) |
|
≤50 percent Relative humidity (30 °C to 50 °C) |
| Altitude |
|
| 工作Altitude |
2000 m |
| 存放Altitude |
12000 m |
| Class of overvoltage |
CAT IV 600 V |
| Security |
|
| General |
IEC 61010-1, Pollution Level 2 |
|
IEC 61010-2-033：CAT IV 600 V |
|
IEC 61557-1 |
| Insulation resistance measurement |
IEC 61557-2 |
| Effectiveness of protective measures |
IEC 61557-16 |
| Protection (IP) level |
IEC 60529 IP40 |
| Electromagnetic compatibility (EMC) |
|
| International |
IEC 61326-1: Portable Electromagnetic Environment |
|
IEC 61326-2-2 CISPR 11: Group 1, Class A |
Group 1: The generation and/or use of conduction-related radio frequency energy within the equipment, which is essential for the internal functioning of the equipment itself
A 类：设备适用于非家庭使用以及未直接连接到为住宅建筑物供电的低电压网络的任意设备中.由于传导干扰和辐射干扰,在其他环境中可能难以保证电磁兼容性.
Caution: This device is not intended for use in residential environments and may not provide adequate radio reception protection in such environments
| Electrical technical specifications |
| 测试仪经校准后在 10 °C 至 30 °C 的工作Temperature条件下其Accuracy可以维持 1 年.在工作Temperature范围以外（-10 °C 至 +10°C 和 +30 °C 至 +50 °C）,波动变化为 5 %时每摄氏度增加 ±0.25 %,波动变化为 20 % 时每摄氏度增加 ±1 %. |
| Insulation resistance test |
| Test voltage |
The range of |
Resolution |
Accuracy |
| 250 V |
<200 kΩ |
Not specified |
Not specified |
| 200 kΩ |
1 kΩ |
0.05 |
| 0.50 mΩ清洁度5.00 mΩ—— |
10 kΩ |
0.05 |
| 5.0 mΩ |
100 kΩ |
0.05 |
| 50 mΩ清洁器500 mΩ—— |
1 MΩ |
0.05 |
| 0.50 gΩ清洁度5.00 gΩ—— |
10 MΩ |
0.05 |
| 5.0 gΩ |
500 MΩ |
0.2 |
| >50 GΩ |
Not specified |
Not specified |
| 500 V |
<200 kΩ |
Not specified |
Not specified |
| 200 kΩ |
1 kΩ |
0.05 |
| 0.50 mΩ清洁度5.00 mΩ—— |
10 kΩ |
0.05 |
| 5.0 mΩ |
100 kΩ |
0.05 |
| 50 mΩ清洁器500 mΩ—— |
1 MΩ |
0.05 |
| 0.50 gΩ清洁度5.00 gΩ—— |
10 MΩ |
0.05 |
| 5.0 gΩ清洁度10.0 gΩ—— |
100 MΩ |
0.05 |
| 10.0 gΩ 50.0 gΩ—— |
500 MΩ |
0.2 |
| 50 gΩ伊灵100 gΩ—— |
5 GΩ |
0.2 |
| >100 GΩ |
Not specified |
Not specified |
| 1000 V |
<200 kΩ |
Not specified |
Not specified |
| 200 kΩ |
1 kΩ |
0.05 |
| 0.50 mΩ清洁度5.00 mΩ—— |
10 kΩ |
0.05 |
| 5.0 mΩ |
100 kΩ |
0.05 |
| 50 mΩ清洁器500 mΩ—— |
1 MΩ |
0.05 |
| 0.50 gΩ清洁度5.00 gΩ—— |
10 MΩ |
0.05 |
| 5.0 gΩ清洁度20.0 gΩ—— |
100 MΩ |
0.05 |
| 20.0 gΩ 50.0 gΩ—— |
500 MΩ |
0.2 |
| 50 gΩ清洁器200 gΩ—— |
5 GΩ |
0.2 |
| >200 GΩ |
Not specified |
Not specified |
| 2500 V |
<200 kΩ |
Not specified |
Not specified |
| 200 kΩ |
1 kΩ |
0.05 |
| 0.50 mΩ清洁度5.00 mΩ—— |
10 kΩ |
0.05 |
| 5.0 mΩ |
100 kΩ |
0.05 |
| 50 mΩ清洁器500 mΩ—— |
1 MΩ |
0.05 |
| 0.50 gΩ清洁度5.00 gΩ—— |
10 MΩ |
0.05 |
| 5.0 gΩ |
100 MΩ |
0.05 |
| 50 gΩ清洁器500 gΩ—— |
5 GΩ |
0.2 |
| >500 GΩ |
Not specified |
Not specified |
长条图The range of：0 Ω 至 1 TΩ 绝缘Test voltageAccuracy：-0 %,在 1 mA 电流时为 +10 % 电容载荷充电率：5 s/μF 电容载荷放电率：1.5 s/μF
|
The range of |
Accuracy |
| Leakage current measurement |
1 nA - 2 mA—— |
±(20 % + 2 nA) |
| Capacitance measurement |
0.01 μf - 2.00 μf |
± (15 percent of the reading 0.03μF) |
| Insulation resistance test电压 |
250v - 2500v |
±(3 % + 3 V) |
| Voltage circuit warning |
警告The range of |
| >30 V |
| Timer (F1537 only) |
The range of |
Resolution |
| 0 to 99 minutes |
Setting: 1 minute |
| 提示：1 秒 |
| Short circuit current |
| F1535 |
>2mA |
| F1537 |
>5mA |
| Ac voltage/DC voltage/resistance measurement (limited 1537) |
| Function |
The range of |
Resolution |
Accuracy
± (reading percentage word) |
| VAC |
0伏--- 600伏 |
0.1 V |
±(2 % +10)
(45赫兹至500赫兹)—— |
| VDC |
0伏--- 600伏 |
0.1 V |
±(2 % +10) |
| Resistance |
0Ω 600.0Ω—— |
0.1Ω |
±(2 % +10) |
| 600Ω 6000Ω—— |
1Ω |
| 6.00 kΩ 60.00kΩ—— |
10Ω |
